A lawn edge is the last detail on a yard that everyone notices. Mow a lawn twice and it still looks average, then run a clean line along the sidewalk and it looks finished. For most homeowners that finishing step is where a gas edger used to be the default, and a cordless one is now the sensible replacement.
Every tool below is a cordless lawn edger. There are no gas models, no corded models and no manual step edgers on this list, because those are different tools for different jobs and mixing them is what makes most roundups confusing. If you want the full range of edger types explained, our guide to the best lawn edgers for clean lawns breaks down the whole category. This one stays strictly battery powered.
We picked these ten after reading thousands of buyer reviews and comparing the specs that actually change how an edger performs: cutting width, whether it runs a blade or a line spool, weight once the battery is fitted, runtime, and whether a battery and charger are in the box. The short version is that the best cordless lawn edgers for homeowners fall into two families, and picking between them comes down to whether you want a defined edge from a blade or a versatile trimmer-and-edger combo.
Table of Contents
Top 3 Picks: Cordless Lawn Edgers for Homeowners in 2026
The three picks below cover the most common situations. The combo at the top is the do-everything choice for a normal yard, the EGO kit is the answer if you want one battery to run a whole fleet of tools, and the 40V Black+Decker is the pick for larger properties and overgrown edges.
WORX 20V WG163 2-in-1 Combo
- 12 inch cut
- 5.5 lb
- 2 batteries included
- 90 degree pivoting head
EGO Power+ 56V Multi-Head Kit
- 8 inch blade attachment
- 56V 4.0Ah battery
- 75 min runtime
- 5 year tool warranty
Black+Decker 40V MAX LST136
- 13 inch cut
- 8500 rpm
- telescoping pole
- 40V battery and charger included
Best Cordless Lawn Edgers Compared Side by Side (October 2026)
This table covers every model in the guide. Use the blade or line column first, because that single choice determines the quality of the finished edge more than any other spec.
| Product | Specifications | Action |
|---|---|---|
| WORX 20V WG163 2-in-1 Combo |
|
Check Latest Price |
 Black+Decker 20V MAX LSTE525 |
|
Check Latest Price |
 Black+Decker 20V MAX LST300 |
|
Check Latest Price |
| Black+Decker 40V MAX LST136 |
|
Check Latest Price |
 WORX 20V WG170 3-in-1 |
|
Check Latest Price |
 CRAFTSMAN 20V MAX CMCED400D1 |
|
Check Latest Price |
 Greenworks 40V ED40L410 |
|
Check Latest Price |
 WORX 20V WG898 Trencher |
|
Check Latest Price |
 VEVOR 8.8 Inch Blade Edger |
|
Check Latest Price |
| EGO Power+ 56V Multi-Head Kit |
|
Check Latest Price |
1. WORX 20V WG163 2-in-1 Combo – the best all-rounder for a normal yard
WORX 20V 12″ 2-in-1 Cordless String Trimmer & Electric Lawn Edger, WG163
12 inch cut
5.5 lb
7600 rpm
2 batteries and charger included
Pros
- Switches from trimmer to edger in seconds
- Command Feed button feeds line without stopping
- 90 degree pivoting head handles slopes and tight spots
- Rubberized support wheels keep lines straight
- Highest review count in this group
Cons
- Light duty 0.065 in line frays faster than thicker line
- Not built for woody stems or brush
- Vine debris can jam the cutting head bearing
The WG163 is the tool we hand to a homeowner who wants one machine for the whole yard. It cuts as a string trimmer, then flips to a wheeled edger for the sidewalk line, and the head pivots 90 degrees when you need to get into a corner behind a shrub or work across a slope.
Two 20V maxLithium batteries and a charger come in the box, which removes the most common complaint about cordless tools. At 5.5 lb it is light enough to walk a long property without switching hands, and the rubberized support wheels do the unglamorous work of keeping the cut line straight.
The line feed deserves a mention because it sounds trivial until you have used a tool without one. You press the Command Feed button on the handle and the line dispenses while you keep working, instead of stopping to bump the head against the ground.
What you give up is durability of the cut itself. The 0.065 in line is thin, and on a hard curb edge it frays and breaks sooner than heavier line, which is exactly where a lot of homeowners notice the difference. Buyers with rough concrete borders should look at one of the blade edgers further down this list.
Who this edger suits
It suits anyone with a lawn, a driveway or a flower bed border who wants one battery platform instead of a shelf of different brands. If you already own other 20V Power Share tools, the two included packs fit straight into that system, which makes this an easy way to add edging to a set you already own.
It also suits older users and anyone with a back or shoulder that objects to a heavy tool. Just over five pounds with a battery installed is the difference between finishing the job and putting the tool down halfway.
Who should skip it
Skip it if your edging is mostly along concrete or brick, because line frays there and a blade holds a much cleaner edge. Skip it if you have thick, stiff warm-season grass or ground cover you need to cut through, since this is a light-duty cutting head and it will bog down.
One more caution. Vine debris collecting in the cutting head bearing is a recurring complaint, and clearing it means pulling the head apart. On a property with heavy vine growth near the bed line, a spool-free design saves the annoyance.
2. Black+Decker 20V MAX LSTE525 – the twin battery kit for long sessions
BLACK+DECKER 20V MAX Cordless String Trimmer and Edger, 12 Inch Weed Eater, 2-Speed Control Weed Wacker, 2 Batteries, Charger and Spool Included (LSTE525)
12 inch cut
5.3 lb
7200 rpm
Two batteries and charger
Pros
- Lightest tool in the group at 5.3 lb
- Two 20V MAX batteries double usable runtime
- EASYFEED button advances line without bumping
- Two speed control trades power for run time
- PowerDrive transmission adds torque
Cons
- Included 1.5 to 2.0 Ah packs give short bursts
- Long recharge times on the small packs
- Plastic trigger can wear and stick over years
- Edging mode drains the battery quickly
The LSTE525 is the same idea as the WG163 with a different emphasis. At 5.3 lb it is the lightest tool we tested in this roundup, and two 20V MAX batteries are included, so you can swap packs and keep going rather than stopping for a charge.
That combination makes it a good match for a property with a lot of border to cover, especially if edging is a Saturday job rather than a once-a-month one. The two-speed control is the underused feature here, letting you drop into a lower setting for thin line work along delicate bed edges and full speed for weeds.
Durability is the strength. Multiple owners report eight-plus years of continuous service from the same unit, and the 20V MAX battery is a very widely sold platform in this category, which means replacement packs and chargers are easy to find later.
The catch is the size of the batteries that ship in the box. Small capacity packs deliver short bursts and take a long time to recharge, and edging in particular is a high-draw mode that empties them fast. If you own the platform already, buy the bare tool and use your existing packs.
Who this edger suits
It suits a homeowner with back or shoulder sensitivity who needs a long reach and low weight. It also suits anyone who already has 20V MAX tools, since the included batteries and the tool fit the same charger as everything else in the range.
Look at this one if you plan to edge around a large lot with multiple walkways and driveways. The twin battery setup means the swap is a ten-second operation rather than a coffee break.
Who should skip it
Skip it if you plan to buy one pack and call it done. The included batteries are the smallest in this group, and on a big property you will spend more time on the charger than on the edging. Skip it if you need to cut stems or brush, since this is a line head.
A minor note for long-term owners. The plastic trigger lever on this model is reported to wear and stick after several years, and the safety lock-out switch is awkward to operate with a glove on. Neither affects a normal few-season ownership, but both are worth knowing about.
3. Black+Decker 20V MAX LST300 – the quiet budget all-rounder
BLACK+DECKER 20V MAX String Trimmer and Edger 2 in 1, Cordless Weed Wacker with Auto Spool Feed, Battery and Charger Included, 12 Inch Steel Deck, Reduced Vibration (LST300)
12 inch cut
5.7 lb
6200 rpm
One 2.0 Ah battery and wall base
Pros
- Automatic Feed Spool advances line without bumping
- Quiet operation with no fumes or pull cord
- Lightweight 5.7 lb body with adjustable handle
- Quick conversion between trimming and edging
- Wall mountable charging base included
Cons
- Single 2.0 Ah pack limits continuous run time
- Low 6200 rpm suits light grass rather than dense growth
- Adjustable handle adds bulk versus fixed shaft models
The LST300 is the simplest tool here and the one most first-time buyers should look at. It starts with a button, runs quietly enough for an early morning, and converts from trimmer to wheeled edger in a few seconds without tools.
The Automatic Feed Spool is the reason it needs no bumping to dispense line, and the included wall mountable charging base is a small detail that makes a real difference in a garage. Reduced vibration design also helps on long sessions at the fence line.
Its 6200 rpm output is the lowest of the combo tools here, and that shows up in heavy growth. Reviewers are consistent about it being suited to light grass, routine flower bed work and fence lines rather than dense weeds or neglected edges.
Who this edger suits
It suits a homeowner with a modest lawn who wants a low-cost, low-fuss first cordless tool. If you trim around beds and fence lines and do a driveway edge a few times a season, this covers the job.
It also suits anyone in a quiet neighborhood who cannot run anything loud early in the morning. There is no pull cord to yank and no exhaust, which makes a Saturday dawn edging session realistic.
Who should skip it
Skip it if you have a large lawn, because the single 2.0 Ah pack means frequent charging breaks. Skip it if your edges have grown heavy, since the low rpm will need repeated passes where a faster head would cut through on the first.
One practical note. The adjustable handle adds bulk compared with fixed shaft models, so if you have very little storage space, a fixed shaft is easier to deal with.
4. Black+Decker 40V MAX LST136 – the wide-cut pick for large yards
BLACK+DECKER 40V MAX 13 in String Trimmer Edger Cordless with Adjustable Telescoping Pole, 2 in 1 Weed Wacker Lawn Edger, Includes Battery and Charger (LST136)
13 inch cut
7.8 lb
8500 rpm
40V pack and fast charger
Pros
- Widest cut path in this group at 13 inches
- High 8500 rpm output handles thicker weeds and overgrowth
- PowerCommand dial balances power against run time
- Adjustable telescoping pole fits different heights
- Fast charger restores the pack in about two hours
Cons
- Heaviest of the Black+Decker models here at 7.8 lb
- Single included battery forces a mid-job recharge
- 40V MAX packs do not fit 20V MAX tools
The LST136 is the widest cut path of any tool in this guide at 13 inches, and at up to 8500 rpm it is also among the fastest. Both numbers matter on a large property because they turn a long job into a short one. A 13 inch swath means fewer passes down a long driveway.
The PowerCommand dial on the handle is a genuinely useful control. Turn it up for weeds and overgrown edges, turn it down to stretch the runtime when you are doing delicate work along a bed line. The telescoping pole and adjustable handle let two people share the tool comfortably.
Be aware of the weight. At 7.8 lb it is the heaviest of the Black+Decker models here, and on a long session the arms start to feel it. The included fast charger is a meaningful improvement over the slow chargers that ship with smaller packs, bringing the 40V battery back to full in about two hours or less.
There is one ecosystem warning worth reading twice. The 40V MAX battery is not interchangeable with 20V MAX tools, so if you already own 20V Black+Decker equipment, this is a separate platform with its own charger. It is a three year limited warranty on the tool.
Who this edger suits
It suits a homeowner with a bigger lot, multiple walkways or long driveway runs where coverage speed matters. It also suits anyone dealing with edges that have been allowed to grow for a season, since the rpm figure gives it the headroom to cut through.
If two people share the yard, the telescoping pole is a real advantage. One length fits the taller user and the other sets it for the shorter one without a separate tool.
Who should skip it
Skip it if weight is a concern for you. It is a long session tool, not a quick touch-up tool, and a lighter option will let you finish the job without a break.
Skip it if you already own 20V MAX tools and you were counting on shared batteries. The 40V platform is separate, so you would be buying a second battery system for the garage.
5. WORX 20V WG170 – trims, edges and mows with one body
WORX 20V 12″ 3-in-1 Cordless String Trimmer/Lawn Edger/Mini Mower, WG170
12 inch cut
5.5 lb
7600 rpm
Trims edges and mini mows
Pros
- Only tool here that also cuts small patches as a mini mower
- Seven handle positions and six head angles
- Command Feed button dispenses line while working
- Two batteries and three spare spools included
- Light 5.5 lb body with long reach for walls
Cons
- Five hour charge time is the slowest in this group
- Mini mower mode suits only very small areas
- Switching between the three modes takes practice
The WG170 is the WG163 with a third mode bolted on, and that third mode is the reason some buyers prefer it. The mini mower function handles small patches of grass, which is useful if you have a courtyard or a strip between two structures that a full mower cannot reach.
Adjustment options are the other headline. Seven handle positions and six rotating head settings let you set the tool up for different users, different angles and awkward areas, and at 5.5 lb it stays light. Two batteries and three spare spools are included, so consumables are covered for a while.
Be clear-eyed about the five hour charge time, which is the slowest here by a wide margin. Plan your sessions around that, and the two included batteries help because you can charge one while you work with the other.
The mini mower is a convenience, not a replacement for a lawnmower. It is for a patch, not a yard. And the three-mode conversion is not instant, so if you are switching back and forth repeatedly during a job, the simpler two-in-one tools will be less annoying.
Who this edger suits
It suits a homeowner with a small yard, a courtyard or awkward grass areas who wants one tool to cover three jobs. It also suits households where more than one person uses the same equipment, thanks to the range of handle positions.
If you have already bought a WORX 20V battery or two, this plugs into that platform and the included spools keep it going for years without another purchase.
Who should skip it
Skip it if you need fast turnaround between tools, because a five hour charge dictates your schedule. Skip it if you were hoping the mower mode would replace a real lawnmower on anything larger than a small patch.
Skip it if storage space is tight. At 45 inches the tool is long, and the head-angle options add adjustment points that make the profile bulkier than a simple two-in-one.
6. CRAFTSMAN 20V MAX CMCED400D1 – the compact blade edger
CRAFTSMAN Cordless Edger Lawn Tool, 20V MAX Battery, Charger and Blade Included, Lightweight Lawn Edger, 7.5 in Cutting Width, 1000 Ft of Edging per Charge (CMCED400D1)
7.5 inch steel blade
8 lb
Edge guide integrated
Folding handle
Pros
- Cuts a clean professional edge along raised lawn fronts
- Quiet electric operation with no fumes
- Folding handle and storage hook for compact storage
- Integrated edge guide keeps lines straight
- Battery shares the CRAFTSMAN V20 platform
Cons
- Included 2.0 Ah pack gives about 10 minutes per charge
- Struggles in hard compacted or heavily overgrown soil
- 7.5 inch blade is narrower than competing blades
- Some owners report the battery overheating under continuous use
This is a real blade edger, not a combo tool, and that single fact changes the finish. A steel blade at the soil line produces the sharp, continuous border between lawn and pavement that line spools cannot quite manage, particularly along a raised lawn front or a brick border.
It is also the most storage-friendly tool here. The handle folds, and an integrated hook fits VERSATRACK wall storage, so a garage with a crowded wall is not a problem. At 8 lb it is manageable for most users, and the integrated edge guide does the work of tracking a straight line.
The included 2.0 Ah battery is the weak point, and it is a weak point nearly every reviewer mentions. Around ten minutes of edging per charge means you are swapping or recharging more often than the spec sheet implies. If you already have larger CRAFTSMAN V20 packs, buy the bare tool instead.
Hard ground is the other limit. Reviewers report it struggling on compacted soil and heavily overgrown edges, which is common sense for a narrow 7.5 inch blade. If your yard edge is rough and rooty, a wider blade will move faster through it.
Who this edger suits
It suits a homeowner whose priority is a crisp, defined edge rather than general versatility. If your beds and lawn borders are the main job, a blade cuts a noticeably straighter, cleaner line than any of the combo tools in this guide.
It also suits anyone with limited storage space, since the folding handle and wall hook are genuinely useful features that most competitors skip.
Who should skip it
Skip it if you expect to trim as well as edge. There is no spool here, so this tool only cuts hard surfaces and defined borders. Skip it if you have no CRAFTSMAN V20 batteries and dislike frequent charging breaks.
Skip it if your soil is hard packed. The narrow blade and modest power are a poor match for compacted edges, and you would be fighting the tool rather than guiding it.
7. Greenworks 40V ED40L410 – the quiet brushless blade edger
Greenworks 40V 8 in Cordless Electric Lawn Edger, 4.0 Ah Battery, Charger
8 inch steel blade
11.9 lb
Brushless motor
Tool-less depth adjustment
Pros
- Brushless motor delivers strong power at low noise
- 4.0 Ah battery capacity for fewer charge breaks
- Tool-less cutting depth adjustment speeds setup
- Handles uneven and sloped ground well
- Four year limited warranty on tool and battery
Cons
- Heaviest tool in this guide at 11.9 lb
- Long 66 inch overall length needs care in tight spots
- 8 inch blade is smaller than some competing edgers
The Greenworks is a dedicated 8 inch steel blade edger built around a brushless motor, and the reviews are consistent about what that means in use. The cut is sharp and defined, the motor runs quiet, and the 4.0 Ah battery included here is among the largest packs in the group.
Tool-less cutting depth adjustment is the feature you will use most. No tools, no guessing, just set the depth and go. It is also designed for uneven and sloped terrain, which matters for yards that are not flat and tidy.
Weight is the honest drawback. At 11.9 lb this is the heaviest edger we covered, and the arms feel it after a long stretch of work. Anyone with shoulder or back sensitivity should test this one carefully before committing, or choose a lighter blade edger instead.
The 66 inch overall length is the other thing to plan for. It gives you reach and leverage, and it also makes the tool awkward to pivot in a tight corner between two obstacles. The four year warranty covers both the tool and the battery.
Who this edger suits
It suits a homeowner who wants a blade cut and a brushless motor, and who is prepared to accept the weight for the sharper result. It is a strong choice for sloped or uneven ground, where a stable wide body and simple depth changes pay off.
It also suits anyone who does a lot of edging in one sitting. The 4.0 Ah pack means fewer charge breaks than the smaller packs used elsewhere in this guide, and the four year warranty is reassuring for anyone keeping a tool for a decade.
Who should skip it
Skip it if you are sensitive to weight or have limited arm strength. This is a long-session tool by design, and a lighter option will get the job done without fatigue.
Skip it if you have very confined edging areas, because the length makes tight pivots harder. And if you need to trim as well as edge, look elsewhere, since this one carries a blade only.
8. WORX 20V WG898 – the blade edger built for deeper trenching
WORX Cordless Lawn Edger, 20V 7″ Trencher for Lawn Border Tending, WG898
7 inch blade
Brushless at 5000 rpm
Three depth settings
8.6 lb
Pros
- Brushless motor and 4.0 Ah battery give gas-like edging power
- Runs 800 plus feet of edging on a single charge
- Dual-wheel guide keeps the tool balanced and tracking straight
- Telescoping shaft collapses for wall storage
- Three cutting depth settings with indicators
Cons
- Included blade can arrive dull and the bolt is hard to reach
- Assembly instructions are thin and a screw may be missing
- 7 inch blade is the narrowest in this group
- Lowest share of five-star ratings among the WORX models
The WG898 is the tool to look at if your edging job involves more than a tidy pass. Its three cutting depth positions at 1.5, 1.75 and 2 inches let you cut deeper than a standard edger, which is what you want when you are cutting back an overgrown edge that has crept into the bed.
It also runs an edge and trench capability, and the dual-wheel guide design keeps it balanced and tracking straight along a long run. Owners doing thick overgrowth praise the power, with one report of edging 850 feet and still having 85 percent charge remaining on a 4.0 Ah pack.
Expect a rough first session. The included blade is a recurring complaint, arriving dull in a number of reviews, and some owners cannot get the mounting bolt free to swap it. A new blade is a cheap fix and worth doing before the first cut.
Assembly is the other snag. The instructions are thin and at least some owners report a missing hardware screw. At 7 inches the blade is the narrowest here, so expect more passes on long lines compared with the 13 inch tool.
Who this edger suits
It suits a homeowner whose edges are overgrown and who needs depth control rather than a light finishing pass. The three position depth adjustment is the reason this tool is worth the extra attention at assembly time.
It also suits anyone already in the WORX 20V ecosystem. The 4.0 Ah battery and 2.0A charger are included, and the telescoping shaft collapses for wall storage, which helps in a tight garage.
Who should skip it
Skip it if you want a tool you can unbox and use in five minutes. The blade condition and the assembly process are real friction points, and they are fixable but they are there.
Skip it if you need maximum cutting width on long straight runs, because at 7 inches this covers less ground per pass than the wider tools here. And if you want to trim as well as edge, this one carries a blade only.
9. VEVOR 8.8 Inch Blade Edger – the widest blade among the standalone edgers
VEVOR Lawn Edger 8.8-in Blade, 20V Battery Powered Cordless Edger Lawn Tool
8.8 inch blade
9.9 lb
3200 rpm
Three depth settings
Pros
- Wide 8.8 inch blade covers ground quickly on driveways and beds
- 65Mn high carbon steel blade and steel tube frame feel durable
- Tall 57.48 in working height reduces bending and back strain
- Three depth settings from light touch-ups to trenching
- Dual-wheel guide keeps lines straight
Cons
- Lowest rpm in the group at 3200 so thick growth needs repeat passes
- 9.9 lb is heavier than most 20V competitors
- Newer listing with a smaller review base
- Support network less established than the major makers
The VEVOR brings an 8.8 inch blade, which is wider than any other standalone blade edger in this group, and pairs it with a 4000 mAh battery and charger in the box. The 65Mn high carbon steel blade and steel tube frame give it a solid, uncomplicated feel in the hand.
Its 57.48 inch working height with a pivoting handle is worth noting for anyone who spends time bent over a bed line. Taller is easier on the back over a long session, and the pivoting handle lets you get the angle right without repositioning your whole stance.
Where it falls down is speed. At up to 3200 rpm this is the slowest motor in the group, and owners report that thick overgrowth takes repeated passes. If your edges are light and well maintained, that is not a problem. If they are heavy, it is.
Two softer considerations. The 9.9 lb weight is heavier than most 20V competitors, and this is a newer listing with a smaller review base than the established brands. Support is also less proven than the big outdoor tool makers.
Who this edger suits
It suits a homeowner who wants a wide blade without moving up a voltage platform, and who does light to moderate edging along driveways and garden beds.
It also suits buyers who want the battery and charger in the box and dislike the process of assembling a platform piecemeal. Three depth settings from 1 to 1.5 inches cover touch-ups through deeper edging.
Who should skip it
Skip it if you have thick, tangled growth. The 3200 rpm motor is the reason this tool needs a second and sometimes a third pass where a faster head would not. Skip it if you are sensitive to weight at roughly ten pounds with the pack installed.
Skip it if you lean on warranty service and dealer support, because the brand has a thinner support network than the established outdoor tool makers.
10. EGO Power+ 56V Multi-Head Kit – the platform to build a whole yard on
EGO MHC1603 Multi-Head Combo Kit 16-Inch 56-Volt Carbon Fiber String Trimmer with POWERLOAD™ & 8-Inch Carbon Fiber Edger Attachment & 56-Volt Power Head, 4.0Ah Battery and 320W Charger Included
8 inch edger attachment
56V 4.0Ah
320W charger
Carbon fiber shaft
Pros
- Brushless power matches gas equipment with instant quiet starts
- POWERLOAD line loading removes the manual winding step
- One battery runs every attachment in the platform
- Carbon fiber shafts backed by a lifetime warranty
- Edger attachment wheels adjust as the blade wears
Cons
- Back-heavy feel once the 4.0 Ah pack is mounted
- Edger blade ships without a sharpened edge
- Shoulder strap is effectively required for long sessions
- Edger blade cuts on one side so you walk each line twice
- Largest commitment in this group for a single purpose
This kit is the argument for buying a platform instead of a tool. You get a power head, a 16 inch string trimmer attachment and an 8 inch carbon fiber edger attachment, and the 56V 4.0Ah battery drives all of them. The same battery will run the rest of the EGO range as you add tools over time.
The numbers behind it are the strongest in this guide. The edger attachment runs up to 75 minutes on low, and a 320W charger is included, which is why it stays running through long edging sessions where smaller packs force a break. The high efficiency brushless motor, carbon fiber shaft and IPX4 weather resistant construction are all premium touches, backed by a five year tool warranty and a three year battery warranty.
There are real ergonomic costs. Once the 4.0 Ah battery is mounted the tool feels back-heavy, and the included shoulder strap is effectively required for anything longer than a short session. Budget for that rather than treating it as an optional extra.
Two smaller notes from owners. The edger blade ships without a sharpened edge, so your first pass will be rough until you hone or replace it. And because the blade cuts on one side only, you walk each edge line twice, which is normal for this type of attachment but worth knowing.
Who this edger suits
It suits a homeowner who wants to own one battery system for a mower, blower, hedge trimmer, chainsaw and edger rather than a separate ecosystem per tool. If you are starting from nothing and plan to add more cordless tools, this is the entry point that makes the rest of the range inexpensive to add to.
It also suits anyone who wants gas-equivalent cutting power and long runtime without the noise, fumes and pull cord. If you are replacing a gas edger and edging for more than a couple of hours at a time, the 75 minute figure on low is the reason.
Who should skip it
Skip it if you are only ever buying one tool. This kit asks you to buy into a platform and a set of attachments, and a single-purpose owner is better served by one dedicated tool.
Skip it if back-heavy handling is a problem for you, or if you do not want to use a shoulder strap. And if you already own a different brand’s batteries, note that none of this transfers across platforms.
How to Choose a Cordless Lawn Edger
Start with the cutting head, because it decides how good the finished edge looks. A combo tool with a line spool is a trimmer that can edge. A dedicated blade edger cuts a hard, straight line at the soil. If your border runs along concrete or brick, the line frays and the blade does not. If you mostly need to tidy grass around trees and shrubs, a combo is the right tool.
Second, decide your battery platform before you fall for a tool. Every brand below runs its own batteries and chargers, and mixing brands means separate chargers on the wall. Look at what you already own, buy the bare tool for that platform if it is available, and you will skip the cost of a battery and charger entirely.
Third, check whether a battery and charger are included. Listings often show a bare tool price, which understates what you actually need. Among these ten, the CRAFTSMAN, Greenworks, WORX WG898, VEVOR and EGO kits all ship with a pack and charger, while the smallest packs on the Black+Decker 20V models are the ones worth upgrading.
Fourth, weigh the tool with a battery fitted, not the bare tool weight. A 5.5 lb body with a large pack can feel heavier than an 8 lb body with a small one. This is the most common surprise for new buyers and the most common reason people give up on a tool mid-yard.
Fifth, look at cutting width and speed together. Width is how much you cover per pass, rpm is how fast you cut. A wide slow head is right for maintained borders, a narrower fast head is right for overgrown edges. Both numbers are listed for every tool above.
Sixth, consider handle type. A D-grip or bail handle gives fine control on slopes and in corners, while a straight telescoping shaft gives reach on long lines. A telescoping shaft also collapses for storage, which matters more than people expect in a shared garage.
Seventh, confirm the warranty and the service network. Warranties here range from two to five years on the tool, and the longest ones come with the platforms that also have the deepest accessory ranges. If you expect to keep a tool for a decade, that is worth weighting.
Start With One Battery Platform
This is the decision homeowners most often get wrong, and it is the one forum buyers ask about most. The edger is rarely the only cordless tool you will own. Within a year most of us add a blower, a hedge trimmer, a chainsaw and eventually a mower, and every one of those tools needs a battery.
The math is straightforward. Batteries and chargers are the expensive part of a cordless yard setup, and they only work with their own brand. Buying one quality tool on a platform you will expand costs far less over five years than splitting the same budget across three different platforms.
Two practical rules. If you already own a mower or trimmer, match that platform and buy the bare tool, because the battery and charger are already in the garage. If you own nothing, start with the platform that has the widest range for your situation rather than the lowest-spec tool you can find.
One warning from long-term owners about battery size. The largest mower battery will run a trimmer all day but makes it uncomfortably heavy at the front. The smallest battery is comfortable and runs out mid-job. For an edger specifically, a middle capacity pack is the right balance, which is why 4.0 Ah keeps appearing in the reviews on the tools above.
Third-party chargers are also worth avoiding. There are reports of chargers that failed and took the battery with them, so use the charger that came with the tool or a manufacturer replacement.
Cordless vs Gas vs Corded Edgers
Against gas, cordless wins on noise, starting, maintenance and emissions, and it loses on sustained heavy cutting in thick growth. A gas edger will run all day at full power; a cordless one will ask you to charge or swap a battery partway through that same job.
Against corded, cordless wins outright for a homeowner. A corded unit is lighter on paper and never runs out mid-edge, but you are dragging an extension cord across a yard and you cannot reach a bed at the far corner without moving the outlet.
Against a manual step edger, the comparison is closer than people expect. A manual edger cuts one clean groove through a defined border and costs almost nothing to run. It is faster on a straight front edge, and it is completely silent. It is the right answer for some homeowners and the wrong answer for anyone with beds, trees or irregular terrain.
Professionals have not broadly adopted cordless yet, and that is worth knowing. Landscaping forums still point commercial crews toward curved-shaft gas models. For a homeowner doing a few hundred feet of border once a month, that distinction rarely matters.
How to Get a Crisp Edge Every Time
Walk slower than you think you need to. The single biggest difference between a ragged edge and a sharp one is pace, and most people rush the first ten feet and then correct.
Set the depth before you start rather than adjusting mid-line. Most tools here offer two or three positions, and the point is to cut at the soil line so the blade or line defines the boundary.
Use the guide wheel, curb wheel or edge guide every pass. That is what it is there for, and it is the difference between a straight line and a gentle wander along a long driveway.
Overlap your passes slightly on a second walk if the first one looks inconsistent. A small overlap removes the scalloped pattern that shows up as a wavy border from the street.
Gloves, eye protection and closed shoes are not optional on a spinning cutting head. And sweep the bed line for stones, sticks and sprinkler heads before you start, because both blade tools and line heads will find them.
If you want a comparison of the wider string trimmer category rather than edgers specifically, our guide to the best cordless string trimmers for homeowners covers the same platforms in more depth.
Frequently Asked Questions
Are battery-powered edgers any good?
Yes. Modern brushless cordless edgers cut like gas equipment, start instantly, run quietly with no fumes, and need no fuel or oil changes. The honest limits are runtime on very long edges and cutting speed in thick warm-season grass. For a typical suburban yard, a cordless edger is a genuine replacement for a gas one.
What is the best stick edger for lawn edges?
Among the blade edgers here, the Greenworks 40V ED40L410 gives the sharpest, quietest result with the largest included battery, the CRAFTSMAN 20V MAX CMCED400D1 is the most compact and easiest to store, and the WORX 20V WG898 is the one with three depth settings for cutting back overgrown edges. All three cut a hard line at the soil rather than a line spool fringe.
What is the best battery-powered trimmer-edger combo?
The WORX 20V WG163 is the strongest all-round combo, with a 12 inch cut at 5.5 lb and two batteries in the box. The Black+Decker 20V MAX LST136 is better for large properties because of its 13 inch path and 8500 rpm output, and the WORX 20V WG170 adds a mini mower mode for small patches.
What should I look for when buying a cordless lawn edger?
Check six things: blade or line spool, whether a battery and charger are included, the weight with a battery fitted, cutting width, motor speed in rpm, and the battery platform you already own. A blade cuts a cleaner hard-surface edge, a combo tool is more versatile, and matching an existing platform is the cheapest way to buy.
Is a cordless edger better than a gas edger?
For most homeowners, yes. Cordless is quieter, starts instantly, produces no exhaust, and needs no spark plug, fuel, or oil changes. A gas edger still wins on sustained heavy cutting in thick growth, where a cordless unit will ask you to swap a battery partway through the job.
How long does a cordless edger battery last?
It depends on pack size and mode. The EGO 56V 4.0Ah kit runs its edger attachment up to 75 minutes on low, while a small 2.0 Ah pack in the CRAFTSMAN 20V gives roughly ten minutes of edging. Higher speed settings, thicker growth, and deeper blade cuts all shorten that. Swapping to a second pack is why twin battery kits are worth considering.
What is the difference between a lawn edger and a string trimmer?
A string trimmer cuts grass. An edger cuts a defined border between lawn and pavement. Combo tools do both with one head, but a line spool frays on hard edges while a metal blade holds a straight line at the soil. If a crisp edge is your goal, buy the blade version or use a combo only for finishing passes.
The Best Cordless Lawn Edger for Your Yard
If you want one recommendation, take the WORX 20V WG163. It is the best cordless lawn edger for homeowners who want a single machine for trimming and edging, it weighs 5.5 lb, and it ships with two batteries and a charger so there is no extra buying to do on day one.
Move up to the EGO Power+ 56V Multi-Head Kit if you intend to own several cordless tools and want one battery to run all of them. Move to a blade edger, the Greenworks 40V for power and quiet running or the CRAFTSMAN 20V MAX for compact storage, if the crisp border matters more to you than versatility.
Whatever you choose, buy the bare tool version if you already own batteries on that platform, and check the grass type in your yard first. Thick warm-season grass will rule out the lighter combo tools faster than any other factor.
We keep a running list of cordless lawn equipment for readers who want the wider picture, including our picks for the best cordless lawn mowers for large yards.